:focal(1743x771:1744x772))
:focal(2030x752:2031x753))
)
:focal(1976x799:1977x800))
:focal(2178x616:2179x617))
:focal(1889x1023:1890x1024))
:focal(1973x660:1974x661))
:focal(1426x934:1427x935))
:focal(924x891:925x892))
:focal(1743x810:1744x811))
:focal(2044x818:2045x819))
Навігація продуктів
Individual prefabrication
We offer complete customised pre-assembly for special requirements. In this context, all individual adapters through to finished manifold assemblies are tailor made to meet customer needs. For optimum safety, all parts are precisely manufactured inclusive of priming and pressure testing.
Our engineers check the plausibility of the project and create a non-binding quotation based on the hydraulic circuit diagram. After your order has been placed, our technicians and engineers will create a CAD drawing, which will be submitted to you for review.
After your production release, production of the individual adapters begins. Competent specialists manufacture the adapters to measure, fully leak test, prime and number them.
Prior to shipping, each adapter is subject to strict final inspection to ensure a high standard of quality. 3. Delivery and installation by the customer
Together with the manifold, you will receive all the required adapters delivered to the building site. The attached CAD BOM makes it clear at which position of the manifold structure each adapter is located. In this way a quick and clean installation of the complete system can be performed in a few hours. For further information, please download our product brochure or download the order form directly.
Advantages for your building project:
- Significant time savings during building
- Cost savings
- Reduced retention of your own specialists on site
- Very high quality and safety thanks to comprehensive leak testing
- Clean installation
Only a few steps needed until finished manifold assembly
1. Quotation and designOur engineers check the plausibility of the project and create a non-binding quotation based on the hydraulic circuit diagram. After your order has been placed, our technicians and engineers will create a CAD drawing, which will be submitted to you for review.
Information required for preparation of the quotation:
- Hydraulic circuit diagram or sketch
- Nominal diameters of the individual circuits
Information required for the design:
- Hydraulic circuit diagram or sketch
- Installed pumps and fittings (make and nominal diameters)
- Nominal diameters of the individual circuits
- If necessary, details of available installation space
After your production release, production of the individual adapters begins. Competent specialists manufacture the adapters to measure, fully leak test, prime and number them.
Prior to shipping, each adapter is subject to strict final inspection to ensure a high standard of quality. 3. Delivery and installation by the customer
Together with the manifold, you will receive all the required adapters delivered to the building site. The attached CAD BOM makes it clear at which position of the manifold structure each adapter is located. In this way a quick and clean installation of the complete system can be performed in a few hours. For further information, please download our product brochure or download the order form directly.